New: LensNext (B2B E-Mail).

New: Signet Armorlite (B2B Webservice).

From 1.12.2019, this is the only official way for online ordering

Essilor OpsysWeb

If no centration values were recorded in the order and the centration mode is y', the values were not converted correctly. Prerequisition for importing is a form and box height, otherwise a coversion is not possible.

General (also for centration program interfaces)

If the same interface was activated for two buttons, but with different suppliers, sometimes the wrong supplier was selected when the button was pressed in an order window. Fixed. Also, the selected supplier is now shown in the tooltip.

Calculation

The column 'Marketing description' didn't show information for lenses and surcharges. Fixed.

New: Responsible attendant

The staff member responsible for this patient can now be entered in the patient card file

Remark field

The remark fields below the email-address can now hold 79 characters.

All case history sheets in the online data service

New: Indication per eye

The indication can now be entered for each eye separately, also in the EyeExam report.

New: Mono-vision

New TAB "Usage" at refractions for mono-vision adaptations.

New: Lab

In CL-Procedures a new tab is available for values measured in the LAB

New: Free Lens acceptance

In CL-Procedures, CLs can now be freely accepted from all previous orders and procedures.

New: APEX (Radii)

APEX degree and position can now be entered in the 'CL-Radii' window.

Complementary refraction

Remarks in procedures

The text-block management for the procedure remarks (subjective, objective, plan, lab) has been separated. Each text-box now has individual text-blocks. Default is the former common text-blocks.

Sales Prices

Barcode

Calculators

New: Huvitz HFR 8000 (Tracer).

New: Huvitz ZFR 500 (Tracer).

New: Weco T6 (Tracer).

Click2Date

For the automatic confirmation emails, all text-parameters of the appointment are now available.

Appointment requests will be assigned to an existing patient from the patient card file, if first and surname plus either phone, email or DOB are identical.

Send Appointment as Email

The title of the appointment, which is send as an email-attachment, is composed of the appointment activity and subject. Especially at Click2Date-Appointments, which are created with the automatic subject 'Online-Appointment', the title now shows e.g. "Spectacle consultation | Online-Appointment".

Delete historical data

Program added to delete old patient data as required by GDPR.

Error Mesages

Informative error message if no update is avaialble for the required version.

Hoya (Webservice)

General (B2B-Format)

Ordering data are no longer recorded in the IPROSYS\Client\...-directory but can be found in the Archiv-directory after ordering.

Hoya Hoyailog

After consultation with Hoya, the HoyaiLog-Webpage will now be started with the appropriate country-specific webpage in the browser, e.g. https://de.hoyailog.com in  Germany.

Interface changed from HoyaiLink to HoyaWebiLink, as iLink is switched off by Hoya at the end of 2019.

New: TAPI-interface for CTI

If a CTI-software has been installed on a computer, the patient's phone number can be dialled directly from the patient card file with one mouse-click.

Postcoder UK

Interface to UK-Postcoder didn't work correctly in a terminal-server environment. Fixed.

New Procedure

When entering a new procedure, the texts at "Results subjective", "Results objective" and "Plan" will no longer be copied over.

Click2Date

In C2D, only those activities are available which have at least one room assigned in a branch which is managed by C2D.

If 'any employee' is selected during appointment request, 'any employee selected' will be shown in the appointment's remark field.

Appointment View

Appointment tool-tip now also shows patient age and sex, if known.

If the filter 'Branch and Group' and 'show all employees present' were set, all employees of the group were shown, even if the branch didn't fit. Fixed.

Holiday lock Drag & Drop / Copy & Paste

Branch is set to the first branch assigned to the employee, if available. Otherwise to the standard branch.

Export

Prior to sending out, the age of the files is checked. If the are 3 days old or older, an additional warning is displayed.

New: OGA (B2B Webservice)

Nika (B2B E-Mail)

Facette-position with value entry in mm from front edge released; Groove depth and width released; Edge break blocked; Everything in consultaton with the supplier.

Prism. Height adjustment blocked, in consultation with the supplier.

Essilor (B2B Webservice)

From 1.12.2018, customers from Flanders order at Essilor-Belgium.

Hoya HoyaiLog

Authentification server changed from www.hoyanet.net (HTTP) to www.hoyacas.com (HTTPS).

Optix Direct (B2B Webservice)

Replaces Optix Direct (B2B E-Mail)

Additional fields released in additional supplier order data window, in consultation with the supplier.

Cooper (Webservice)

 'Material' field is no longer transferred to supplier.

Essilor VisiOffice, Optovision VET, Rodenstock ImpressionIST, VisuReal

Patient address, Phone, Fax and patient remark are no longer transferred to the third-party program for data protection reasons.

Patient Input

Bank details: Update of  BIC-list.

Essilor OpsysWeb

From 1.12.2018, customer from Flanders order at Essilor-Belgium.

Hoya Identifier

Authentification server changed from www.hoyanet.net (HTTP) to www.hoyacas.com (HTTPS).

Click2Date-Activity

For Click2Date-activities, a patient assignment must be possible.

Calling up from card file / order

New setting for start-view, if the diary is opened from the card file or an order to make an appointment. Option for day or week view.

Appointment entry

On changing the appointment's activity, the room will not be changed if the room is assigned to the new activity.

Lock entry

During new lock entries from the holiday monthly view, the transfer and preset of the employees sometimes didn't work. Fixed.

Rodenstock DNEye Scanner

Sometimes wavefront-measurements were also shown during topography data import into a CL-order. Fixed.

Data backup

Sometimes the data backup crashed near the end if very large files were processed. Fixed.

Event protocol sending to our support

During sending of several emails, an error messages was displayed for the first ones although the emails were sent successfully. Fixed.

uTrust

Identiv uTrust 2700 F/R now supported.

New: Signet Amorlite (B2B Webservice)

New: Optix Direct (B2B Email)

Essilor (B2B Webservice)

new HTTP-Server: h1.essilor.tradexpressondemand.com

Patient Input

If, during a new patient entry in the search patient window, the window is closed with "Cancel", the already entered details/fragments are now deleted. Up to now, fragments that didn't comply with the required fields setting, could be stored in this way. This route has now been closed.

Ear moulds

New: Integration of Smartoptics ear scanners

Click2Date (Online Appointments)

The branch addresses are now transferred with the branch data. These are used for the geodata in the Google-Maps window.

It can now be set for each workstation, whether or not the table with the Click2Date-appointments shall be shown.

Day and week view

If grouping by room has been selected, columns containing appointments without room assignment had the column header "without".
Now these columns are named according to the branch designation in brackets.

Collision check

Sometimes, a collision warning for fictional rooms was displayed for appointments with a branch but no room. Fixed.

Data backup check

If a successful data backup has not been made for more than 7 days, a warning will be displayed.

Also, a warning will be displayed from time to time, if the automatic data backup is run in the mode "Ipro data w/o Blobs". In this mode, documents, images, videos, measurements etc are not backed up. In case of an error, data can be lost.

Please take care to back up your complete data regularly.

Zeiss (B2B Webservice)

Option added to send patient name in additional lens order data.

If drill holes were transferred without diameter, an error message was displayed. Error cause fixed.

Nika (B2B E-Mail)

Option for 2nd pair orders added in additional lens order data.

Rodenstock (B2B Webservice)

An individual pupillary diameter measured by the Impressionist4, is now saved and sent with the order.

Support for new surcharge DN2 added.

Promotion, Opt-In-Preferences

The value for 'Health data' in the Opt-In-Preferences was not correctly saved sometimes. Fixed.

Deleting patients

During patient deletion with transfer of orders to another patient, the contact details (mobile, email) of the patient to be deleted can now also be transferred to the other patient.

Text-parameters lenses

Parameters /LRSPVAL/ and /RRSPVAL/ added for the recommended sales price of lenses. The RSP for the lens plus surcharges from the current price list will be shown.

Lens Consultation Interface

Rodenstock WinFit

Rodenstock Consulting

Import of main viewing distance. Near corrected.

New symbols for interface buttons.

Zeiss i.com mobile

Eye height and width will no longer be imported if a traced form has already been saved in the order. DBL in this case only, if the field is still empty.

Workshop Devices

Briot / Weco

Connection via LAN for newer Briot / Weco devices added.

Appointment Diary

New: Click2Date (Online Appointments)

Appointment view

Email address in the appointment will be marked with colour if invalid.

ICS-Export

Deletion of appointments / Locks sometimes didn't work. Error removed.

Eye-Exam Interface

Rodenstock DNEye Scanner

Zeiss i.Profiler

Surname filter now possible.

Date of birth can now be shown, if available.

Rodenstock DNEye Scanner

The distance of cornea to lens is now saved as part of the DNEye-measurement data and will be sent with the order.

Support for DNEyeScanner Software Version 3 added.

The measurement data type is now shown.

Import of topography-data in CL-order and Eye-Exam report, if DNEyeScanner has been updated to Version 3.x.

Mailshop (B2B Email)

B2bOptic format changed from version 1.5.1 to 1.6.1 at the supplier's request.

Multiple orders activated at the supplier's request.

Zeiss i.Com

Zeiss i.Com mobile

Zeiss VisuStore

New symbols for the interface buttons.

New: m-lens (B2B EMail)

Eyetech (Eyeline)

New server-address included.

EMO Essilor (B2B Webservice) (Hungary)

New order input field NVB.

Order input field Head-Eye-Quotient removed at the supplier's request.

Bach, Conil, MarkEnnovy, Menicon

New supplier symbols.

Sauflon

Support for new SFTP-server of CooperVision added

Reminder input in patient card file

Multiple identical reminders cannot be entered for one patient anymore.

Appointment sending by email

The emails are now displayed correctly by Outlook, Thunderbird, iOS, Android, Windows Mail, Windows Calendar, Google Mail and Google Calendar, and the appointments accepted, if applicable.

During sending from the list view, text parameters sometimes were not replaced. Fixed.

Eyetech (Eyeline)

New server-address added.

Essilor (B2B Webservice)

New ordering parameter NVB (near vision behaviour).

Following a request by the supplier, "Min. lens thickness at drill hole" cannot be entered anymore for Precal.

Reize (B2B Webservice)

New ordering parameter "Size".

Hoya (Webservice)

If the Hoya-server reports several errors for one order, these are now displayed in list form.

Rupp Hubrach (B2B Webservice)

New ordering option "Preference" with value-input (e.g. 50, 75, 100) for EyeScreen-lenses.

Johnson (Webservice)

Support for the countries UK and LUX.

Lens price list loading

Loading of lens price lists in the standard SF 6.10.3 now possible.

Zeiss VisuStore

After ordering in VisuStore, the order status cannot be retrieved from Zeiss webservice for up to 60 seconds. In this case, winIPRO assumes the ordering has been successful and sets the order to "ordered".

Essilor OpsysWeb

New ordering parameter NVB now supported.

Zeiss i.Com Mobile

Can now be used without the ordering system "Zeiss (B2B Webservice)".

FrameFit is now imported as a measurement value.

Zeiss i.Com
Zeiss VisuStore
Zeiss Logon
R+H Nuvola
Rodenstock Winfit

Frame height, width and DBL are not imported anymore, if a traced form or rough form has previously been entered in the order, and the form has not been overwritten by an equivalent form.

Zeiss VisuStore
Zeiss Logon

2nd pair info are now sent.

Essilor VisiOffice

Import / Export of parameter NVB added.

Contact details

Symbol for 'SMS' replaced by balloon, to better distinguish it from '@' for email.

History and Symptom sheets

Name additions are now also shown with the patient name.

Email-sending

In some email-clients, the text-only part of HTML-mails has been shown as well, fixed.

CL-Catalogues

CL-catalogues from the area 'w/o prices' contain this description now also in their names, to better distinguish them from the ones with prices in the collective areas (Favourites, Downloads, News).

Password input, User log-on

The windows for password input and user log-on now close automatically after 4 minutes of inactivity. This prevents that automatic processes have to wait forever. The window will close after 4 minutes with "Cancel".

IGA (B2B E-Mail)

Option "Multiple Order" activated following the supplier's request.

OPS Optics (B2B E-Mail)

Following the supplier's request, the file sent now has a different name.

Knecht & Müller (B2B E-Mail)

Knecht & Müller (WinWorld 3)

Preference activated by supplier, according to current price list.

Rupp+Hubrach (B2B Webservice)

Changeover to new side-independent field for handedness.

De Ceunynck (B2B Webservice)

New field for handedness added, after consultation with supplier.

Zeiss Logon

After closing Logon, a query about importing the order data will now be displayed.

New: Zeiss VisuStore

New entry (Belgium only):

Insurance status and Insurance company will be automatically set during new patient entry.

New Procedure

If a new procedure shall be recorded as a delivery, but the last procedure hasn't been a delivery (e.g. recheck), a query is now displayed, asking if the last delivery should be taken as the preset for the new procedure.

Measurement Type Tonometer

New field Corneal Thickness.

Tonometer Essilor Wave Analyser

Tonometer Visionix VX 120

Tonometer Nidek NT 530P

Corneal thickness is now transferred from the device

New: Autorefractor NIDEK AR-1S

Error messages

Detailed error messages are now displayed on errors regarding HTTP-, FTP- and SFTP-connections.

Email Test-Function

Error removed in the SMTP/POP3 test function: At POP3, the error message from SMTP was displayed, even when no error was detected at POP3.

CL-Catalogues / Look4

CL-catalogues which are available at Look4, now have to loaded directly from there, they are not available at IPRO anymore. Therefore, previously saved favourites may get lost, but can be saved again. New: Different country-versions of the same catalogue are now distinguished.

Suppliers / Printing

If the text in the remark field was longer than 2000 characters, the text was cropped and the program crashed during the next start-up. Now, a maximum of 4000 characters can be entered. Program will not crash anymore on reaching the limit.

Branches / Form-printing codes

New printing codes for /FRANCHISE/ and /BRATEXT11/ to /BRATEXT20/

Zeiss (B2B Webservice)

Option added to change the HTTP-Port from 80 to 443 in the supplier master data. This will encrypt the data transmission to Zeiss.

Austrian Optic (B2B Webservice)

Glazing orders now available.

MPG&E (Webservice)

After MPG&E modified their webserver, the winIPRO ordering system couldn't communicate with it anymore. winIPRO ordering system has now been adapted accordingly and can access the server again.

Zeiss Logon

Customer number and password are now taken from the supplier master data, and not from the interface preferences anymore.

CL-, HA-Tabs

Multi-digit combined order/procedure-numbers are now displayed in a smaller font instead of being cropped.

Priority messages

Sometimes, priority messages from the same patient card file on the same workstation were displayed, if the user clicked multiple times and very fast in the card file, and many tabs are displayed in the card file. Problem fixed.

... or at least alleviated.

Tonometer Essilor Wave Analyser

Tonometer Visionix VX 120

Intraocular pressure is now corrected by the corneal thickness.

Changes

If changes are made in the task scheduler, the configuration is now re-loaded at all running workstations, not only at the workstation, where the change has been made. Affects only those workstations that run winIPRO all the time. All others will reload the configuration during winIPRO start-up anyway.

CL-Catalogues / Look4

CL-catalogues, which are available at Look4, will not be cared for at IPRO anymore. Instead, the winIPRO Online Data Service will load them directly from the Look4-server via a standard access. In the Online Data Service window, you will find them in the "CL-Look4 General" directory.

Customers with individual Look4-access data will still have additional access to their individual catalogues in the directory "CL-Look4 own brands".

New: Look4 Frames catalogues.

Sometimes, the webbrowser didn't remember the last window size and position. Error removed.

Write error on USB-devices

If, on a USB-device, iprosave-directories can be deleted but not newly created, the cause may not necessarily be a hardware failure, but anti-virus programs and caching procedures can also block it. In this case, the access to the device will be re-tried several times automatically.

New: Networking of print-profiles, text-forms and SMS/Email texts.

New: Networking of SMS/Email configurations.

New: Networking of patient contact marks.

New: SMS-sending via webservice. Status view and info in the patient contacts and the order status control list "SMS Status", as well as automatic status update via winIPRO task scheduler.

New: DeCeunynck (B2B Webservice)

New: Pullmann (Pullmann Client)

Address input

Age is shown even for invalid date of birth 29.2. in non-leap year.

Post code for Romania now 6-digits.

Lists

The Address/Country column can now be edited. Attention: Please take care that the postcode format fits the country! Otherwise you may not be able to enter the postcode in the address input window anymore.

Stock lists

New booking option "Breakage" available in manual lists and evaluation lists.

Electronic delivery notes

Delivery notes from Charmant, Menrad, DeRigo, Visibilia and Marchon can now be loaded into the system.

Sales report

Sales reports can now be created for Eschenbach, DeRigo, Charmant, Menrad.

Rights

New rights area "Contact marks".

New rights area "SMS-configuration".

Rights area "Word processor" extended: Print-profiles added

Preferences

During preferences-changes, a warning was displayed, that these preferences come from a profile, and will be overwritten during next Ipro-start, even if the profile in question hasn't been assigned to the current workstation. Error removed.

Loyalty Lab

The patient data country will not be fixed to DE or NL anymore, instead, the appropriate ISO-code will be exported. Changes made after consultation with Loyalty Lab..

New: OPS Optics (B2B E-Mail)

Reizen (B2B Webservice)

Following the supplier's request, base curve input has been locked.

Omega Optix (B2B E-Mail, B2B Webservice)

After consultation with the supplier, the distance centration point distance z will be sent for bifocal lenses too.

Frametec (B2B E-Mail)

Following the supplier's request, "z" instead of "q" will be transferred for bifocal lenses.

New: Zeiss Logon

Hoya HoyaiLog, Hoya Identifier

Import of decentration data in Polar view.

e-cado + Vinzent

Eye-rotation point distance b' is now imported.

Address input

After "Country" input, the cursor now moves to the postcode automatically.

ICS-Export

Appointments are now exported with correct time-zone information. The current time-zone is automatically determined, but can be changed in the diary options.

Schulz (B2B Webservice)

Austrian Optic (B2B Webservice)

New field "Inset" added after released by the lens suppliers.

Bausch (Webservice)

Orders are now sent in one file as Bausch cannot combine several files. For the time being, the status check had to be switched off because of that.

Zeiss i.Com mobile

Measurements of the type "Current glasses" (CurrentRX) are not included in the "prescription" tab anymore.

Patient Stoplight

Symbols have been adapted to the new design.

New: It is now possible to define own colours for the symbols.

New: In addition to the winIPRO Stoplight-symbols, any symbol from installed fonts can be used.

Design

Order-symbols for "Quotation", "Void", "Picked-up", "Paid" etc. have been adapted.

iProfiler / Data transfer

Newer instruments do not necessarily still have the assignment 1=h, 2=v . During data transfer, the assignment is now done depending on the axis position. This modification has already been added to the EyeExam Report as well.

ICS-Export

New: Export of appointments per employee in individually set intervals.

New: Format settings for the ICS-export can be individually set and adapted.

New: Automatic upload of the appointments to the iConnect Calendar Cloud and import to iPhone, Android smartphone or Outlook.

New: Extension of order printing by additional fields and functions.

New: Option to set up print-profiles which control the print-dialogue and pre-select the forms from the print-profile according to the filters set.

Design

New: The documents management is now accessible from all order types in the print-dialogue, documents and printouts can be saved directly with the order.

New: HS Visutron Touch

New: Nidek NT-530P

New: Weco C.6

New: Briot Attitude

Loyalty Lab

Customer numbers from suppliers are not cut off after 6 digits or filled up with 0 anymore.

Mailshop (Edifact via email)

New email-address: ipro-Bestelldaten@dao-ag.de. Please change in supplier's master data.

New name: Deutsche AO (Edifact via email)

New: Bach (Webservice)

New: Conil (Webservice)

New: Conta (Webservice)

New: Mark Ennovy (Webservice)

New: Menicon (Webservice)

New: Procornea (Webservice)

New: Zeiss i.Com mobile

Essilor OpsysWeb

Send centration point distance "z" for Bifo/Trifo.

Tax number (NL, B):

Postcode (IRL):

Eye examination management

Automatic data acceptance and prisms initialisation R -> L now also for near refraction and delivery values.

Dominant eye

Dominant eye in patient card file is no longer reset if the entry is deleted in the order.

Receipt printing (Italy)

The patient's tax number is now included in the fiscal-printer receipt.

Patient contacts

Printing and exporting of reminders can now be added in patient contacts.

Sometimes the program crashed during an FTP-upload if the FTP-server could not be reached. Fixed. Now an error message is displayed.

o.k.m (B2B E-Mail)

New email-address order@okm-lens.de; please change in supplier master data.

General

Thickness reduction for stock lenses can no longer be ordered.

Optimeyes-Format / France

Program-error during price-list loading removed.

Patient details

New option 'all languages'

Default settings for 'all languages' and 'all countries' can be set in the preferences.

The progress bar now shows the current activity and a success message after finishing, instead of the bytes downloaded.

Zeiss (B2B Webservice)

Error messages adapted according to info from Zeiss.

Essilor (B2B Webservice)

Following a request from the supplier, the distance centration point is now sent for Bifo/Trifo-lenses.

Postcode

New entry with preset

The delivery note number is not copied over anymore to the new entry with preset.

Holiday view

Sometimes, the diary crashed when started in holiday view. Fixed.

Patient assignment

Sometimes, the program crashed during new phoenix-patient assignment. Fixed.

Branch networking

Insurance codes input

Sometimes, the program crashed during insurance code input. Fixed.

Email sending

Revised procedure for checking the validity of email-addresses.

Zeiss (B2B Webservice)

New ordering parameter C-Code for new lenses from 1.9.

BOW (B2B E-Mail)

Glazing at lens supplier activated in ordering options.

Second pair ordering now possible.

Schulz (B2B Webservice)

Glazing at lens supplier activated in ordering options.

Hoya (Webservice)

Option special material in facette window renamed to the precise designation SPX.

Hoya HoyaiLog

Special values for MyStyle V+ lenses from the Identifier are now exchanged with winIPRO via the interface and recorded in the glasses order. Thereby, ordering this lenses is now possible directly from winIPRO.

Sending appointments via Email or SMS

Patient and appointment data are now shown in the preview.

Adapted for new version Medmont 6

Multiple selection

Automatic local copy

Local copy can now be sent to an alternative directory.

Essilor (B2B Webservice)

"Preset: Send customer name" now available in supplier master data.

R+H (B2B E-Mail, B2B Webservice, E-Mail)

The ordering option preference intermediate has been deactivated. Doesn't exist anymore at the supplier's side.

R+H (B2B Webservice)

New ordering options: Base curve demo, head tilt range, second pair ordering.

R+H (B2B E-Mail)

Head tilt range and base curve demo have been released also for the older ordering via email.

R+H (B2B-XML)

New ordering option: Second pair ordering.

X-Ramvision (B2B E-Mail)

Frame finishing option released by supplier.

Rodenstock (B2B Webservice)

Ordering option "insurance" extended.

Nika (B2B E-Mail)

Ordering option base curve released after consultation with supplier.

Visall (Visall Online)

New field: Progression length.

New: Ophthalmica (B2B E-Mail)

New: LuxLens (B2B E-Mail)

OptiSwiss Osshop

Brillenprofi L1Shop

Dynoptic Dynashop

Progression length field in additional order data released after consultation with the suppliers.

Optovision WinOnline 5

Exchange format to WinOnline changed to make the exchange of the progression length possible.

SF6-Format

Support for Version 6.10.2 of SF6 price list format added.

Second address

Mini-button for "all fields" was deactivated. Fixed.

CL-procedure complementary refraction

 Stabilisisation axis empty for 0.

Axis empty for cylinder 0.

Glasses lenses

New columns available for lenses: Progression length, external order number

Setting 'Automatic appointments check'

Input of -1 now possible. In this case, no appointment check will be carried out.

Rodenstock DNEye Scanner

Patient-list calling up accelerated.

New: Essilor Wave Analyzer

New: Visionix VX 120

All Oculus-interfaces

Automatic data backup

Automatic stopping of instruments and lab device drivers now works again.

For automatic data backup, the notes/error windows which require a user interaction, have been removed. Notes and error messages are now displayed via the task scheduler.

Zeiss Logon (Webservice)

New ordering parameter: Thickness reduction prism (for Benelux: C-Code)

New: X-Ramvision (B2B-XML)

Zeiss Winfral (ISM)

For the design type, Winfral doesn't distinguish between "empty" and "Balanced". Following our customers' wishes, winIPRO will now show "Balanced" in the additional order data in these cases, and not the empty entry anymore. For Zeiss, both entries are identical, as "Balanced" is the standard value if nothing has been entered.

iProfiler / Data transfer

For newer devices, the assignment 1=h, 2=v is not necessarily set as default. During data transfer, the assignment is now done accordig to axis position.

Zeiss Logon (Webservice)

New ordering option for announced products: Thickness reduction prism.

Message sending (SMS, Email)

Hoya (Webservice)

Status window during ordering.

Optimised communication with the Hoya-Server, makes sending of orders faster.

Optovision (B2B-XML)

New: Reize (Webservice)

New: Omega Optix (Webservice)

BOW (Edifact via Email)

The supplier cannot read the patient name transferred by winIPRO correctly anymore. Therefore, the patient name cannot be transferred anymore, unfortunately.

Bausch (Webservice)

Johnson (Webservice)

MPG+E (Webservice)

Sauflon (Webservice)

Wöhlk (Webservice)

Status check only for orders, which have been ordered during the last 14 days.

Status window displayed during ordering and during status check.

New entry / Preset

For new entry with this preset, the employee is now also copied, even if the employee number is higher than 3000.

NIDEK Lan Protocol

Low-Vision orders could not be called up at the devices. Fixed.

System parameters - Functions

Galaxa (B2B-XML)

In consultation with the lens supplier, the ordering option "object distance" has been activated.

Shamir (B2B-XML)

New in Austria

Frame finishing activated in consultation with the supplier

Novacel (B2B-XML)

Ordering options adapted to the supplier's requests.

Essilor (B2B-XML)

Nika (B2B-XML)

New fields in additional order data: Object distance, Inset

AVM (B2B-XML)

New ordering parameters: Refraction distance near, Base curve

IGA Horus (B2B-XML)

New ordering parameters: Refraction distance near, Initials, Design-characteristic, Inset

Seiko (B2B-XML), Seiko (Email)

The options "Balance lens" and "Slab off" have been deactivated following a request by Seiko.

New: Knecht+Müller (B2B-XML)

General

If the mean value of the side-specific values of CVD, inclination and frames lens angle differs significantly from the side neutral field, an error message is now displayed.

Opticland

The files tar.exe and gpg.exe are now expected to be in the program directory. This is a workaround for a problem with some installations on Windows 2012.

R+H Nuvola

Umlauts are now transferred correctly.

Austrian Optic Webservice

Schulz Webservice

The supplier informed us that some tracer formats could not be read. Now, everything is converted into one format automatically and then transferred.

Web portals general

New: IGA Online

New: Brillenprofi L1-Shop

New: Dynoptic Dynashop

Zeiss WinFral (ISM)

Activisu

New symbol on the interface button

Patient search

Tab configuration

Lens input

Sometimes, the obligatory coating has been automatically added only for the left lens. Fixed.

Frames input

Form printout-Parameters

Patient promotion

Week view

Email sending

New: Essilor APH5000

New: Topcon CV5000S

Preferences

Preferences

Newly created reminder groups were not instantly visible in the survey. Fixed.

In the "News" section you will now find the new additions from the last 6 months instead of the last 3 months.

The list in the "News" section is now sorted by release date.

A warning note is displayed, if the selected download requires a newer version of winIPRO than the one you are currently using.

New section for 'Individual data', mouse-over tool-tip added.

Download didn't work with some Proxy-Servers. Workaround added.

Suppliers

Lens-/CL-suppliers with an ordering system, for which no symbol has been avaialble, have now received a symbol for the button. Total of 24 new supplier symbols added.

Internet parameters

Proxy-authentification for HTTP is now supported.

A Socks-Proxy can now be used for HTTP.

Internet access: Test-connection button for Email access data

Event protocol

The menu item "Data backup - Restore" has been moved to the Diagnosis part, to prevent unintended restores.

Extended winIPRO-version number with publication-ID ('PubID')